• January 31st, 2016

Configuration and Implementation

Paper, Order, or Assignment Requirements

IEEE- Format for Bibliography

Below is the requirements for Springfield Site copied from the Network Paper.

Required Implementation: Device hostnames, banners, secured passwords and spanning tree protocol.
•Device Configurations: Implement device hostnames to match the xACME educational topology labels. Provide a template and sample configuration for the MOTD banner and login banner (wording and implementation) for one of the switches. Keep this generic, as it will be implemented on all switches in the xACME educational topology. Lastly, include the configuration steps for implementing device passwords on both console port (out-of-band communications) and VTY (Telnet/in-band communications). All passwords should be encrypted.
•Spanning Tree Protocol (STP): Briefly explain the advantages and purpose of the STP. Administrators are having a difficult time placing switch 1 as the root. Provide a sample configuration for implementing SPT on the switches. Choose the mode you feel would be best suited for the environment and justify why. Switch 1 will need to be the root switch in the Springfield topology. Consider any security measures that can be implemented to protect the devices from bogus BPDUs.

Note: When approaching the spanning tree challenge, do not concern yourself with the multiple VLANs at this time. Focus simply on the default VLAN1, which is the active VLAN that all ports belong to in this topology at this time.
•Please refer to the following configurations:

◦SpringfieldSw1
◦SpringfieldSw2
◦SpringfieldSw3
◦SpringfieldSw4

Springfield assignment Instruction

Problem statement:

In the beginning please give brief descriptions of the project, such as why are you doing, what are the problems, and possible solutions.

From the given information, you are required to make a functional network. In Springfield we have a router and four switches connected as daisy chain topology. Then we have output of show commands. It is obvious that it is a non-functional network and you have to implement a solution to make functional.

Task in Springfield assignment
• From the show output commands, you can identify the problems and then provide solution.
• Configure all the tasks as in Springfield assignment as per instructions
• Create Server VLAN, Instructional VLAN, and Administrative VLAN
• Configure Access method of VLANs
• Configure Switch 1 as root bridge
• Configure trunking on all switches
• Configure default gateway
• Create and configure interface VLAN1

Latest completed orders:

Completed Orders
# Title Academic Level Subject Area # of Pages Paper Urgency